[EU Ship] Global Version LAUNCH X431 V+ V4.0 Car Diagnostic Scanner Bidirectional 37+ Services, AutoAuth FCA SGW

Product Description

• Pilot Quantity Learning: Carry out a procedure to teach the ECU the ideal Pilot Injection for the engine.
• FSC (Forward Sensing Camera) Aiming: Store the camera shot angle in the FSC by reading a target used for aiming into the FSC. The FSC aiming procedure is performed after replacing the FSC, the FSC clip.
• Seat Belt Reminder Warning: Turn on or turn off the seat belt warning according to your preference.
• Transmission Adapting: Reset the transmission's control unit such that the stored shift pressure and timing values that have been learned over time are reset to default values.
• Au-di /VW firmware protection cancel features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.
• Cylinder Balance test/Cylinder leakage test/Cylinder Pressure variations/Relative Compression Test.
• (PMI) Programmable Module Installation: LAUNCH X431 V+ 4.0 escaner para autos support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

• Variant coding is programming ECUs to meet vehicle variants, such as left-hand drive or right-hand drive. Some states/countries require the automatic activation of the headlights while driving, which results in another vehicle variant. Variant coding includes the enabling and disabling of software-driven functions.

• Having the boot function means that you have an expert who is ideal for your repairs. It frees you from the hassle of finding automatic channel numbers and login codes. It consists of a detailed operating guide and operating instructions. For different car models, the X431 V+ scanner will provide you with specific instructions on auto-login, matching, setup and coding.

• Disable lost keys to prevent the car from being stolen, add new keys, and match replaced IMMO module. For more advanced IMMO programming functions, X431 V+ can use with PROG 3 key programmer.

• Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

• LAUNCH X431 V+ 4.0 escaner para autos support PMI function, Compatible with Ford /Lincoin/ Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

• Cylinder power balance-test can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance-test, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder powerbalance-test is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.

All System Diagnosis - Reads/Erase Trouble codes, data stream info. and more

LAUNCH X431 V+ can read DTCs and data streams for ALL systems to diagnose car comprehensively including Fuel system, Emission system, Transmission, Engine, Body, Powertrain and more, thus users don’t have to buy other tools for diagnosing systems for time & money saving.

All System Bidirectional Scan Tool: LAUNCH X431 V+(Bigger,Bidirectional,Better )

• With this diagnostic tool’s Active Test, you can output the command into the ECU in order to turn on/off actuators, to find faults in the subsystems of your car effortlessly, without using the vehicle’s control: Turn on the radiator fan | Modulate the throttle | Open/close windows | Operate mirrors | Turn on/off the lights | Turn on/off the sound horn | Test door l-ock … （Available test varies by the vehicle manufacturer, year, and model.）

• Instead of entering the Vehicle VIN number manually, this professional diagnostic scanner comes with efficient Auto VIN Technology for retrieving vehicle information in just one touch, so the users are capable of quickly diagnostic all the ECUs on their vehicles and running a diagnosis on the selected systems.

37+ Mechanics Frequently USED Service Functions (21 special functions in Menu, many special function are done in car software, please note):

ECU CODING – The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
OIL RESET – Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET – Perform steering angle sensor calibration and clear records;
BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed;
DPF REG – Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
KEY PROGRAMMING – Help ECU to recognize the new keys when you need to add new keys.
MORE ADVANCED FUNCTIONS ADDED: Windows Calibration + Seats Calibration + Tyre reset + Language Change + A/F Reset A/F + Coolant Bleed + Transport Mode + Adblue Reset + NOx Sensor Reset NOx + Stop/Start Reset + SCN Coding(!!! only LAUNCH X431 V + has this function while V PRO does not)

GROWING FUNCTIONS:

Accompany with continuous update of Launch X431 software and program, More functions has been added : Head light Fitting, Seat Matching, Door and Window Initialization Study, Sunroof Initialization, Air Suspension Matching, Gearbox Matching, Injector Calibration, Multimedia Video Reset, Cluster Reset, Immobilizer Service, Tire Change Reset, (depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized.

Remote Technical Support

By using this function, users can receive ad-hoc remote support from LAUNCH’s technical engineers, colleagues, or friends, by allowing them to control this tablet device on their PC via the TeamViewer software.

Extensive Vehicle Coverage - 108 Car Brands and 10000+ Cars supported:

Aisa:
Changcheng, Daewoo, Huachen, Zhongxing, Indian Tata, JAC, Maruti, Perodua, Chery, Isuzu, Jinlong, Suzuki, Saipa, HM, Hmazda, Ikco, Malaysia Proton, Luxgen, Toyota, Changan, Futian, Honda, Wuling, V-class, Jpisuzu, Kia, Indian Maruti, Indian Mahindra, Malaysia Perodua, Hafei, Lifan, Mahindra, Nissan, Xiali, Zhongshun, Tata, Changhe, China GM, Saicmg, Mazda, Zhongtai, Daihatsu, BYD Flyer, Hyundai, Proton, Subaru, Ssangyong, Joylong, Mitsubishi,Gonow, Qoros, Maxus, Mvm

Europe:
Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR

USA:
Gm, USAFord, Chrysler, Willy

Australia: Austford, Holden
Brazil: BXFiat, BXGM


 

X431 V+ Tablet Parameters

 

Operating System	Android 10.0
CPU	4-core 2.0GHz
Battery	6300mAh rechargeable polymer lithium battery
Memory	4GB
Storage Capacity	64G (can be expanded to 128GB)
LCD	10.1 inch
LCD Resolution	1920*1200 IPS
Touch Screen	Capacitive Touch Screen
Cameras	5.0 mega pixels front and 8.0 mega pixels rear
Wi-Fi	802.11a/b/g/n/ac  (2.4GHz / 5GHz)
Bluetooth	Supported
Working Temperature	0℃ ~ 45℃
Storage Temperature	-20℃ ~ 70℃

DBSCar Connector Parameters
 

Connection	Bluetooth
Typical Power Consumption	(12V)Static current 25 mA
overall unit average current	35 mA
Working Temperature	0 °C~50°C
Working Voltage	powered by vehicle battery, DC 9V-18V

Kindly note:

Because of unnecessary needs of diagnostic market , LAUNCH factory doesn't provide COMBI-4,FUSE,SEDAN-3,FORD-20,SMART OBD 22-16E these 5 adpaters. You can also check the packing list for details when you receive LAUNCH X431 V Plus,thank you!

  
Package Includes:

1pc x tablet
1pc x DBSCar VII diagnostic connector
1pc x Power adapter
1pc x OBD main cable
1pc x USB cable
1pc x BENZ-38 connector
1pc x BENZ-14 connector
1pc x NISSAN-14+16 connector
1pc x BMW-20 connector
1pc x CHRYSLER-6 connector
1pc x FORD-6+1 connector
1pc x GM/VAZ-12 connector
1pc x HONDA-3 connector
1pc x KIA-20 connector
1pc x MITSUBUSHI/HYUNDAI-12+16 connector
1pc x TOYOTA-17 connector
1pc x TOYOTA-22 connector
1pc x Double clamp power line connector
1pc x The cigarette lighter connector
1pc x UK standard conversion head
1pc x EU standard conversion head
1pc x US standard conversion head
1pc x Password envelope
1pc x Manual
1pc x Quick start
 

Contact Information:

Whatsapp: +86  15002705698
Email: Sales@LaunchX431.co.uk

Scan LaunchX431.co.uk QR Code to Order Anywhere and Anytime by Mobile Phone