LAUNCH S2-2 Sensorbox is designed to test and simulate most vehicle sensors, quickly troubleshooting the ECU. It can be compatible with LAUNCH scanner X-431 PAD V and X-431 PAD III V2.0, to maximize the repair shop’s revenue.
Launch i-TPMS Handheld TPMS Service Tool Can be Binded with X-431 Scanner or with the i-TPMS APP Supports All 315/433MHz Sensors
X-431 V+ SmarLink HD is a 10.1-inch smart car diagnostic device developed based on Android 10.0 system. It uses a 1.8Ghz 4-core high-efficiency processor, 4GB RAM + 64GB ROM large storage, and is equipped with a high-endurance battery to run faster, more stably, and last longer. The standard new SmartLink C 2.0 diagnostic connector makes the diagnostic function more powerful. Supports system-wide fault diagnosis, with functions such as code reading, code clearing, data stream reading, special functions, and action testing.
Launch X-431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module developed by Launch Company based on Linux system, dual processor Cortex-A7+Cortex-M7, 8G storage, 256M storage, 320*480 resolution. It supports Bluetooth, Wi-Fi, USB and other communication methods, and can be used with X-431 PRO3S and PRO5 series.
LAUNCH CRT5011E is a professional TPMS diagnostic tool that integrates TPMS sensor activation, reading, learning and programming. It can activate and read tire pressure sensor information through high or low radio frequency and uses the OBD interface to reset the TPMS modules. Moreover, it can program the sensor by receiving a high frequency of 315MHz/433MHz.
Launch X431 Immobilizer Programmer Simulator Key SI-KEY work with X431 IMMO Plus/ IMMO Pro/ IMMO Elite/ GIII X-Prog 3 for Toyota All Key Lost
Support all keys lost for Toyota, BYD and other models
Launch X431 Smart key Emulator is similar to APB112 to Autel.
Launch New Energy Battery Pack Diagnostic Upgrade Kit comes with battery pack testing cables for various vehicle brands. The battery pack diagnostic software and some diagnostic software for new energy vehicles can be activated and downloaded with included activation card.
Launch X431 CAN FD Adapter, used together with X431 V+, X431 Throttle, X431 PAD V/II.
It is mainly for the detection of license plates of CAN FD communication protocols such as GM, Jaguar, and Land Rover (reading fault codes, data streams and other special functions).
Launch X-431 V+ HD3 is a modified version of the multi-brand scanner Launch X-431 Pro which, in its new edition, received a more powerful tablet and a diagnostic function for heavy duty vehicles. X-431 V+ and HD3 achieves full diesel truck model and full system fault diagnosis through the Bluetooth communication between Data Link Connector (DLC) and smart mobile terminal.
Thinkdiag is an Automotive Diagnostic Device same like easydiag. Think diag supports full systems diagnsis for the car, and 16 kinds of reset functions.it including kinds of car software. you can delete car errors codes and reset the system if you have the thinkdiag.
Launch LTR-03 RF Sensor is LAUNCH own designed and produced RF-Sensor that provides 98% vehicle coverage to offer the best TPMS solutions for any repair shops or tire shops. It can combine both 315MHz and 433MHz frequencies in one sensor
This package include Launch X431 PAD VII Elite Scanner, X431 XPROG3 Programmer and IMMO Programmer MCU3 Kit. This package offer saves you money than buying them alone, We can offer you 5 years warranty, lifetime customer service, and tech support.
One Year Online Software Update Service for Launch CRP909 (Subscription Only)
This update serive is suitable for Launch X431 HD III Module which free update service has been expired. you can buy this service to extend another one year free update.
Original LAUNCH WiFi Mini Printer works for X431 V/ X431 V+/ Pro3/ PRO/ PAD II, It can be used to record and print the diagnostic results at any time by the users. It not only provides the convenience for the users, but also improves the operational performance for X431V/V+.
All Softwares Authorization for THINKDIAG One Year Free Update Online (No Hardware)
Launch Creader CR3001 is a small size color CReader with complete OBDII/ EOBD Diagnostic funtions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4. It features a 1.77-inch color display and diagnostic trouble codes defining funtion.
Launch X431 Pro3s+ V5.0 is a high cost-effective automotive diagnostic device developed based on Android 9.0.X-431 PRO3S+ V5.0 can cover more than 98% of the car models in the market. Launch X431 PRO3S+ can work with X-431 SmartLink C 2.0 Heavy-duty Truck Module, can test 12V vehicles and 24V trucks (Include Gasoline and Diesel)
Cheaper than buying one by one.
With Smart Box 3.0 J2534 interface, Supports DoIP and CAN FD Protocol
Add Modules to Expand Features, IMMO, TPMS, ADAS, Battery Tester, Videoscope etc
Enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading, and anti-theft component replacement.
1. With DBScar VII, Supports CAN FD, DoIP protocols
2. Full system diagnostics + bi-directional control + 38 service functions
3. ECU offline/online coding, FCA AutoAuth, Topology mapping, Multi-language, 2 years free update