LAUNCH CNC603A Metal Exclusive Ultrasonic Fuel Injector Cleaner Cleaning Machine 4/6 Cylinder Fuel Injector Tester 220V/110V

Launch CNC603A (Metal) Fuel Injector Cleaner Tester

LAUNCH CNC-603 is an advanced electromechanical product,which can clean and test injectors by simulating engine working conditions.It can also perform cleaning on the injectors and fuel supply system on vehicle.

Hightlights:

1.Dismantle free cleaning
2.Uniformity/Sprayability test
3.Automaticlly Ultrasonic cleaning
4.Delicate appearance
5.Sealing test
6.Injecting flow test
7.Built in ultrasonice tank,more compact and easy to clean
8.Multi-language: English, Japanese, Russian, Korean, French, Portuguese, Italian, Chinese.  

CNC 603A Functions:

 

1.Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
2.Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
3.Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
4.Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
5.Auto test: To test injectors by simulating different working conditions.
6.On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle
 

 

Product Specifications:
 

Power	AC220V-230V，50Hz/60Hz 1.5Amax
Mechanical Power	300W
Ultrasonic Cleaning Power	100W
Speed Range for Simulation Test	10～9990rpm (step: 10rpm)
Timing Range	1～9999s Pulse
Width Range	0.5～25ms (step: 0.1ms)
Speed Range for Simulation Test	10～9990rpm (step: 10rpm)
Timing Range	1～9999s Pulse
Width Range	0.5～25ms (step: 0.1ms)
Operating Volume	2000ml
Packing Dimension	458mm×433mm×537mm
Main Unit Dimension	355mm×350mm×356mm
Net Weight	10.5kg
Gross Weight	13kg
Environment Temperature	0℃~+45℃
Relative Humidity	＜85%
Strength of External Magnetic Field	＜400A/m

Note: Open fire is strictly prohibited within 2M.

 

 

1.Clean injector's outside with cleaning liquid before opening the machine .Putting injectors in ultrasonic bathtub after the outside of injector is free of dirt. The cleaning fluid does not exceed the connection port of the pulse line.

2.Turn on ultrasonic system allowing the ultrasonic energy to dislodge any particles build-up inside the injectors. After cleaning, the remaining cleaning fluid can be recycled.

3.Fixed injectors on main machine, testing injectors for resistance, shorts, and current draw.The test liquid can be added to the half of the glass tube.

4.Performing leak test, spray pattern, and flow rate testing on flow bench.The injectors are now returned to the flow bench for retesting of all functions.

 

 

1pc x Launch CNC603A